Payment & Shipping Terms:
|Power Consumption:||150W||Input Voltage:||AC 100~277 V / AC 220~480 V|
|LED Driver:||Sosen / Meanwell||LED Chip:||Lumileds 3030|
|Efficacy:||145 Lm/W||Luminous Flux:||21,750 Lm|
150W Linear High Bay Lighting With White & Black Color / Warehouse linear fixture
Model No. : EL-LNGP-150
Power : 150W
Input Voltage : 100-277VAC or 200-480V 50/60Hz
Power Factor : >0.95
Power efficiency : >96%
Lumen Efficiency: 145lm/W
Beam Angles: 30×100°, 60×100°, 30°,90° ,110° ,150°
IP Rating: IP66
Life Span: 50000 hours, @25°C
Product Size: 917x103x96mm
Heat-sink Material: Graphene composite
Tempered glass and acrylic Lens
LED Driver: Meanwell
LED Chip: Lumileds 3030
Zigbee Dimmable, Dali/DMX, Motion sensor, PIR Sensor, Microwave Sensor ,1-10v dimmable options
This fixture’s polycarbonate lens directs 30° x 100°, 60°x 100° beam to shelves and aisle floors without wasting energy lighting the top unseen surfaces of storage racks.
While their attractive, modernistic styling adds to their appeal, it’s actually a by-product of a rugged, heat-dissipative, extruded graphene construction that is fully sealed to IP66 ingress protection against water spray and dust.
As a result, these fixtures can be used either indoors or outdoors in large open or semi-open storage sheds.
While high bays in large open areas are typically installed at heights not less than 20 feet, these linear high bays allow for installation in wide aisles and/or high ceilings.
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Contact Person: Lynn.Yao