Payment & Shipping Terms:
|Lens:||30×120° ,40×100° 90° ,110° ,150° 60×100° ,60×120°, 60×150°,70×135°,75×150°,80×150°||Certificate:||ETL DLC CB TUV IECEE|
|Application:||Sports Stadiums||IP Rating:||IP66 / IP67 For Driver|
300W 180LPW Exterior Flood Lights / High Power Outdoor Flood Fixture UL ETL Listed
|General Specifications||Light Engine|
|Model No||EL-PED-300||CCT||2700-6500K (Option)|
|Beam Angle||20/40/60/90/120°||CRI||>80 (Option)|
|Application||Indoor/ Outdoor field||Luminaire Effeciency||>180LM/W|
|Ambient Temperature||-40℃-+65℃||Lumen Maintainace(LED)||L70>80,000H|
|Bracket Meterial||Stainless Steel|
|Lamp Hosing Material||Aluminum Alloy|
|Wind Load (Front)||EPA = 2.339(ft²)|
Using only the highest quality components, the Edge Series LED Light Fixture is designed for industrial applications where reliability and performance
are critical as the bulb maintenance is difficult or impossible, not to mention the high cost.
Every component of the Edge Series LED Light Fixture has been carefully engineered to provide the most reliable performance and bring across many
benefits of utilizing solid state lighting technology in industrial applications. Edge Series LED Light Fixture is rated IP66, suitable for both indoor and
300W Flood Light Fixture:
Modular desigh, fast heat dissipation
Super high brightness, narrow beam
50W--450W can be chosen
Lumileds Led Chip. MeanWell Driver
Long lifespan with 5 years warranty
Power coated driver housing
Stainless steel hardware
6063 Aluminum Substrate
Powder Coated Die End Cover
1. Tunnel,Subway, Underground.
2. Gym, Sports Stadium
3. Building, Billboard
4. Gas Station, Garage
5. Park, Garden.
6. Workshop, Factory.
8. Road, Highway.
9. Yard, Square.
10 Station, Dock,Deck, Ship, Boat.
11. Aquarium etc.
To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected, and maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:
-- Be certain electrical power is OFF before and during installation and maintenance.
-- Luminaire must be connected to a wiring system with an equipment-grounding conductor.
-- Make sure the supply voltage is the same as the rated luminaire voltage.
-- Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
-- Avoid to use in environments containing sulfur, chlorine, or other halides, methyl acetate or ethyl acetate, cyanoacrylates, glycol ethers, formaldehyde or butadiene.
Contact Person: Lynn.Yao